Table of Contents
Advertisement
2. INSTALLATION
2.6 Cooling fan
The HA-LH HA-LF and HA-LFS servo motors have a cooling fan. Leave the following distance between
the servo motor's suction face and the wall.
Servo Motor Series
HA-LH series
HA-LFS601 to 12K1
HA-LFS701M to 15K1M
HA-LFS11K2 to 22K2
HA-LFS6014 to 12K14
HA-LFS701M4 to 15K1M4
HA-LFS11K24 to 22K24
HA-LF30K2/37K2
HA-LF30K24 to 55K24
HA-LFS15K1 to 37K1
HA-LFS22K1M to 37K1M
HA-LFS30K2/37K2
HA-LFS15K14 to 37K14
HA-LFS22K1M4 to 50K1M4
HA-LFS30K24 to 55K24
2.7 Cable
The power supply and encoder cables routed from the servo motor should be fixed to the servo motor to
keep them unmovable. Otherwise, cable breaks may occur. In addition, do not modify the connectors,
terminals and others at the ends of the cables.
Distance L
[mm]
[in]
50
1.97
100
3.94
150
5.91
2 - 13
L or longer
Servo motor
Cooling fan
Wind
Advertisement
Table of Contents
