Mitsubishi Electric MELSERVO HC-KF Series Instruction Manual page 11

CONFORMANCE WITH UL/C-UL STANDARD
Use the UL/C-UL Standard-compliant model of servo motor.
Unless otherwise specified, the handling, performance, specifications, etc. of the UL/C-UL Standard-
compliant models are the same as those of the standard models.
The servo motor is compliant with the UL/C-UL standard when it is mounted on the flanges made of
aluminum whose sizes are indicated in the following table.
The rated torque of the servo motor under the UL/C-UL standard indicates the continuous permissible
torque value that can be generated when it is mounted on the flange specified in this table and used in
the environment of 0
mount the servo motor on a flange with a heat radiating effect equivalent to that of this flange.
Flange Size
HC-KF(-UE)
[mm]
HC-KFS
150 150 3
150 150 6 053 13
250 250 6 23
250 250 12 43
300 300 12 (Note 1) 73
300 300 20
550 550 30
650 650 35
950 950 35
Note 1. 73 is not available for the HC-KF(-UE) series.
2. 524 to 7024 are not available for the HC-SF series.
to 40 ambient temperature. Therefore, to conform to the UL/C-UL standard,
(Note 2)
HC-MF(-UE) HA-FF C
HC-SF
HC-MFS -UE
HC-SFS
053 13 053 13
23 23 33
52 to 152
43 43 63
53 to 153
524 to 1524
73
121 201
202 352
203 353
2024 3524
502 702
5024 7024
Servo Motor
HC-RF HC-UF
HC-RFS HC-UFS
13
23
81
103 to 203 43
73
353 503 72 152
301
202 to 502
A - 10
HA-LF
HC-LFS
HA-LFS
52 to 152
202 302
601 to 12K1
701M to 15K1M
502 to 22K2
6014 to 12K14
701M4 to 15K1M4
11K24 to 22K24
15K1 to 37K1
22K1M to 37K1M
30K2 37K2
15K14 to 37K14
22K1M4 to
50K1M4
30K24 to 55K24
HC-AQ
0135 to
0335