Advertisement
Available languages
Available languages
24
www.raider.bg
parameter
Voltage
Frequency
Protection class
3
Store the battery only in
dry rooms with an ambient
temperature of +10°C to +30°C.
Place only charged
batteries in storage (charged at
least 40%).
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence
of an accident.
1.2. Do not operate in an environment of grinding increased the risk of explosion, close to flammable
liquids, gases or powders.
During operation, sparks may be realised from angle grinder, which can ignite dust or vapors.
1.3. Keep children and bystanders at a safe distance while operating the battery machine, If your
attention is diverted, you may lose control while working with the cordless machine.
2. Safety when working with electricity.
Keep the machine from infiltration of water into the cordless angle grinder. That increases the risk of
electric shock.
3. Safety work.
3.1. Be concentrated, watch your actions carefully and act cautiously and prudently. Do not use the angle
grinder when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work may have the effect of extremely serious injuries
3.2. Work with protective workwear and always with safety glasses.
Wearing personal protective equipment, such as breathing mask, strong, tightly closed shoes with a
stable grapple, protective helmet and ear muff, reduce the risk of an accident at work.
3.3. Avoid the risk of the cordless grinder being inadvertently plugged in. If, when carrying the cordless
machine, you hold your finger on the switch trigger, there is a risk of an accident at work.
3.4. Avoid the unnatural positions of the body. Work in a stable position of the body and at any moment
maintain balance. This will allow you to control the accumulator angle better and safer if an unexpected
situation arises.
3.5. Work with appropriate clothing. Do not work with wide clothing or jewelery. Keep your hair, clothes
and gloves at a safe distance from the rotating units of the battery machine. Wide clothes, jewellery, long
hair can be captured and dragged by rotating parts.
3.6. Before turning on the angle grinder, be sure to remove all the tools and wrenches. An instrument
forgotten on a rotating unit can cause trauma.
3.7. If it is possible to use an external aspiration system, make sure it is on and functioning properly. The
Charger
measure
V AC
Hz
-
value
230
50
II
Advertisement
