Table of Contents
Advertisement
INSTALLATION
For the recommended air supply System installation see
Instruction Manual 307-375.
These are additional recommendations for Maximum
Noise Reduction.
1. The air line should be connected
to air motor with a
flexible hose: Also, flexible material outlet hose and
auction hoses should be used. Avoid solid plumbing
where possible, which carries noise vibrations.
2.
Mount the air motor on resilient rubber pads, rather
than sheet metal.
3. Determine minimum air inlet pressure and pump cy-
cle rate to achieve desired spray ability or minimum
wear end
l e s s
overall noise.
pressure and flow. This will result in less system
4. Air supply to the motor should be conditioned to a
pressure dew point of 55OF with inlet air temperature
of 70°F
(21OCI.
. .
. :
,
. . ,:
. .
. .
. .
4
307-304:
Advertisement
Table of Contents
