Receiving Preset Stations In Order (P.call).18; Ambience Effects; Surround Modes - Kenwood VR Series Instruction Manual

VR/KRF-V SERIES (En/KM)
Receiving preset stations in order
(p.call)
D
Use the remote control to select the tuner as the source.
•
The remote control switches to the tuner operating mode.
B
Use the P.CALL key to select the desired station.
• Each time you press the Key. another preset station is received in
order.
Pressing the P.CALL
(a)
key (►w) does the following:
0i -*02-*03-*.38-*39-*40—01-►02-*O3-*
Pressing the P.CALL (v) key does the following:
01 *-02-*-03-*-.38*-39*-40*-01 «-02<—03«-
Holdlng down the key, lets you skip through the presets, receiv¬
ing each for 0.5 seconds apiece.
This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to Input the proper speaker settings
beforehand.
Manufactured under license from Dolby Laboratories Licensing Corpo*
ration. DOLBY, the doubie-D symbol d] and 'PRO LOGIC* are
trademarks of Dolby Laboratories Licensing Corporation
Surround modes
Dolby Pro Logic
Dolby Pro Logic is a specially encoded 2 channel surround format
designed to provide theater-like surround sound from Dolby Sur¬
round encoded sources {such as video and Laserdisc software
marked
TT\[ommmmSSm
]). This receiver is equipped with a Dolby Pro
Logic surround decoder to let you enjoy the wioe variety of currently
available Dolby Surround home video software.
Dolby 3 Stereo
Dolby 3 Stereo is available for systems that do not have surround
speakers. When in the Dolby 3 Stereo mode, the surround information
is redirected to the front left and right speakers. This mode is
designed for use with Dolby Surround program sources, but can also
improve sound field unity for programs that are not Dolby Surround
encoded. Dialog positioning and sound image definition, however,
may not be as accurate when used with programs that are not Dolby
Surround encoded.