Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-V7070D Instruction Manual

Listening to radio broadcasts

Presetting radio stations manually

The RDS auto memory function assigns preset numbers to RDS stations
starting from preset number "1". Therefore, be sure to execute the RDS
auto memory function before using the following operations to manually
store AM stations and other FM stations, and RDS stations. See
"Presetting RDS stations (RDS AUTO MEMORY)".
TUNER
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Blinks for 5 seconds
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
3
Use the MULTI CONTROL knob or Multi ( % / fi ) keys to
select one of the station presets (1 – 40).
4
Press the MEMORY key again to confirm the setting.
• Repeat steps 1, 2, 3, and 4 to store as many stations as
necessary.
• If you store a station at a previously used preset, the old station will
be replaced by the new one.

Receiving preset stations

TUNER
Numeric keys
1
Press the TUNER key to select tuner as the source.
MULTI CONTROL
MEMORY
Lights for 5 seconds
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
THX
ACTIVE EQ. MATRIX
Surround EX
DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
2
Enter the number of the preset station you want to receive
(up to "40").
Press the numeric keys in the following order:
For "15", press
§
For "20", press
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
SP MUTE
A B
L C SW R
LFE
SL S SB SR

Receiving preset stations in order

TUNER
RDS
RTY
AUTO
MEMORY
STEREO
TUNED
1
Press the TUNER key to select the tuner as the source.
2
Use the P.Call @ / # keys to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.Call # does the following:
Pressing the P.Call @ does the following:
Holding down the # or @ keys, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
0,5
0,0,)
OPTICAL 6CH INPUT CINEMA EQ. DTS. DOLBY DIGITAL
AUTO DETECT
ACTIVE EQ. MATRIX
CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC
(P.Call @/#)
STEREO NEO:6 RDS
THX
RTY
Surround EX
LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
(P.CALL)
25
EN