Receiving Preset Stations In Order (P.call); Surround Modes - Kenwood VR Series Instruction Manual

Receiving preset stations in order (P.CALL)
VALID EARETIIT SISOS SELES RS LLL IO RG PRET S
P.CALL
TUNER E
P.CALL ————e-e
RC-R0607 RC-R0407
RC-R0507
Use the remote control to select the tuner as the source.
¢ The remote control switches to the tuner operating mode.
EB Use the P.CALL key to select the desired station.
«Fach time you press the ai another preset station is received in
order.
Pressing the P.CALL (A) key (m=) does the following:
01-+02-+03-~ ...... 38-+39-—+-40-+-01--02--03—
Pressing the P.CALL (¥) key ("@) does the following:
01+-02+-03~— ...... 38+-39+-46+-01+-02+--03—
Holding down the key, lets you skip through the presets, receiv-
ing each for 0.5 seconds apiece.
The P.CALL key on the front panel of the VR-257 functions the
same way as the P.CALL (4) key on the remote control
Surround modes
REPRE EEE
VR/KRF-V SERIES (En/KM}
This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to input the proper speaker settings
cae
Manufactured under license from Dolby Laboratories Licensing Corpo-
ration. DOLBY, the double-D symbol [XJ and "PRO LOGIC" are
trademarks of Dolby Laboratories Licensing Corporation.
.
SESE RE RURAL a TE
Daiby Pro Logic
Dolby Pro Logic is a specially encoded 2 channel surround format
designed to provide theater-like surround sound from Doijby Sur-
round encoded sources (such as video and Laserdisc software
marked [XX [patay sunncunn]). This receiver is equipped with a Dolby Pro
Logic surround decoder to let you enjoy the wide variety of currently
available Dolby Surround home video software.
Center speaker (C)
Subwoofer (SW)
Front Speaker (L, R) .
Surround speakers (S)
Dolby 3 Stereo
Dolby 3 Stereo is available for systems that do not have surround
speakers. When in the Dalby 3 Stereo mode, the surround information
is redirected to the front left and right speakers. This mode is
designed for use with Dolby Surround program sources, but can also
improve sound field unity for programs that are not Dolby Surround
encoded. Diaicg positioning and sound image definition, however,
may not be as accurate when used with programs that are not Dolby
Surround encoded.
Center speaker (C)
Subwoofer (SW)
Front Speaker (L, R)