Table of Contents
Advertisement
press MEM or tap "Data Deletion" icon to enter data deletion page. When the
cursor is at "Yes", press MEM or tap "Yes" icon to delete the stored data. If pressing
MEM or tapping "No" icon when the cursor is at "No", the stored data will not be
deleted and the present page will return to function menu page. Press
the cursor to "Return" icon, then press MEM or tap "Return" icon to return to
function menu page.
8 Touchscreen Calibration
In function menu page, press
icon, and press MEM or tap "Touchscreen calibration" icon to enter touchscreen
calibration page, then tap the symbol "+" in sequence. Return to function menu
page after calibration.
9 Power-off Time Setting
In function menu page, press
icon, then press MEM or tap "Power-off Time Setting" icon to enter power off
setting page, press
icon to change the power-off time, the tester will not power off if the time is set at
"000", press
"Return" icon to return to function menu page. The time of powering off
automatically is set at from 000 to 999 minutes, the tester will automatically power
off after it is turned on for 5 minutes by default.
10 Alarming Setting
In function menu page, press
then press MEM or tap "Alarming Setting" icon to enter alarming setting page,
Data cannot be recovered after deletion!
The operation of data deletion represents all stored
data are deleted at a time.
or tap "
to move the cursor to "Return" icon, then press MEM or tap
to move the cursor to "Touchscreen calibration"
to move the cursor to "Power-off Time Setting"
" icon to move the cursor, press
to move the cursor to "Alarming Setting" icon,
9
to move
or tap " "
Advertisement
Table of Contents
