Table of Contents
Advertisement
2.8
Limit values
Note
This function will be available at a later time via a firmware update.
The power monitoring device has a function for monitoring up to 12 limit values. These can
be monitored for violation of the upper or lower limit.
In addition, the limit values can be combined with each other using a logic operation. The
result of the logic operation can also be used to trigger specific actions in the same way as
the individual limit values.
The limit value violations are shown on the display or, depending on how the LEDs are
configured, by the LEDs lighting up, flashing or going out.
PAC4220
Equipment Manual, L1V30827278B-01
Description
2.8 Limit values
33
Advertisement
Table of Contents
