Table of Contents
Advertisement
Installation Instructions
TOOLS REQUIRED
¢ Tinsnips to cut banding
e Stepladder
* Bucket
* Level
¢ Appliance Hand Truck
¢ Tubing cutter
« 7/16" open-end wrench
e #2 Phillips screwdriver
¢ Drill and appropriate bits
« 5/16", 7/16" socket
* Safety glasses
« 1-1/4" open end wrench
* Pliers
« 1/4" ratchet
HARDWARE SUPPLIED
e Water filter bypass plug
e Anti-Tip brackets
« 1/4" nut and ferrule
MATERIALS REQUIRED
¢ 35" long 2x4 for Anti-Tip support
« 1/4" copper water line tubing or GE SmartConnect™
Refrigerator Tubing kits
« Water shut-off valve
* Custom panels for fresh food door, freezer drawer
and grille panel
* Screws to secure refrigerator to cabinetry.
* Stick-on hook and loop fastener strips for
1/4" side panels
FLOORING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is at the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator,
or approximately 1,200 Ibs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under the
refrigerator where you are working.
GROUNDING
THE REFRIGERATOR
IMPORTANT—(Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a
standard three-prong (grounding) wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG FROM
THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
Advertisement
Table of Contents
