Table Of Contents; Important Information; Caring For Your Stainless Steel; Tools Required - GE Monogram ZDOD240HSS Design Manual With Installation Instructions

CONTENTS
Important Information
Caring for Your Stainless Steel ...................... 3
Tools Required....................................................... 3

CARING FOR YOUR STAINLESS STEEL

• Before installation or first use, we strongly advise
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such
as Stainless Steel Magic™. To preserve and protect
the fine finish, we also strongly advise that you apply
stainless steel cleaner monthly.
All stainless steel can be damaged by the following sub-
stances. Care must be taken not to allow these substances
to come in contact with your Outdoor/Indoor Refrigerator.
If any of these do get on your unit, wash
and clean the unit immediately (see the Care and
Cleaning section in the Owner's Manual).
• Battery Acid
• Pool Chemicals (such as Chlorine and Bromine)
• Lawn Fertilizer
• Ice Melting Salts
• Creosole
• Iodine
• Pickling Juice
• Urine
The following naturally occurring materials can
cause damage to the stainless steel finish. If any of
these substances do get on your unit, wash and clean
the unit immediately (see the Care and Cleaning section in
the Owner's Manual).
• Bird Droppings
• Tree Sap
• Sea Water

Important Information

Design Guide
The Installation Space ....................................... 4
Product Clearances and Location
Requirements ........................................................ 5
Preparation for Built-In Under-Counter
Installations Only ................................................ 5
3
Installation Instructions
Grounding the Product .................................... 6
Step 1, Remove Packaging ............................. 6
Step 2, Level ........................................................... 7
Step 3, Connect Power ...................................... 7
Step 4, Slide Product into Cutout .................. 7
Step 5, Set Temperature Controls ................ 7
Staining Wood Drawer Fronts ...................... 7

TOOLS REQUIRED

• Heavy-duty work gloves
• #2 Phillips screwdriver (for built-in installations only)
• Adjustable wrench
PARTS SUPPLIED
• Two keys