INDICATION selector
Selects what Is displayed on the preset monitor.
DSP: The data of the E-File are displayed together with the
picture selected by the PST bus select button.
OFF: The picture selected by the PST bus select button is
displayed. In normal operation, use this position.
PHASE:
ForSCand H phase adjustment betweeen the SEG
output signal and the extemal sync signal. When the
PGMI/PST selector is set to PGM, the phase indication
pattern will appear on the preset monitor screen. Use this
patten as a guide for phase adjustment.
Abus/B
bus select section
A busiB bus select buttons
Select the pictures used for wipe, mixing and external key.
Pictures can be selected by A bus select buttons and B bus
select buttons separately.
On the monitor screen, the picture selected by the bus to
which the EFF lever is positioned is displayed.
The buttons 1 through 8 correspond to the VIDEO IN 1
through 8 connectors on the connector panel. When a button
is pressed, the picture connected to the corresponding
connector is selected.
When the BACKGROUND buttons pressed, the signal
generated by the built-in background color generator is
output. The color of the background is adjusted by the
BACKGROUND selector and the BACKGROUND COLOR
stick and LUM control.
-- BACKGROUND selectors
Selects the background when the BACKGROUND button of
the A bus or B bus select buttons is pressed.
WHT:
White background
COL:
Color background selected by the BACKGROUND
COLOR stick
BLK:
Black background
EFF (effect) lever
The A bus picture is gradually replaced with the B bus picture,
or vice versa when the MIX or WIPE button is engaged. When
the lever is moved to the uppermost position, the A bus
picture will be obtained, and when the lever is moved to the
lowermost position, the B bus picture will be obtained.
The torque of the lever can be adjusted. For details, refer to
"ADJUSTING THE TORQUE OF THE LEVERS".
48