Table of Contents
Advertisement
i
i
Zz
i i
i
i
:
6 Press the PST CUT IN/OUT button.
Picture
in which the letters
aS
?
The button will fight, and the characters are added on
Lehi to be inserted
interes WDE reed
the picture on the preset monitor.
©
If necessary, adjust the size and position of the inserted
characters,
7 Tur the KEY LEVEL control so that the inserted characters
a
will be clear,
;
E-File
83 Turn the EDGE control so that the flicker at the edge of the
INSERT
characters will stop.
This step Is not necessary for the characters from the
SMC-70G/70GP,
3 Adjust the color with the COLOR MATTE stick and LUM
contro! when the CM is selected in step 5.
The adjusting method is the same as that of the
background color. Refer to "HOW TO SELECT THE
BACKGROUND COLOR"
) insert the characters into the program picture with the
PGM CUT IN/OUT button or INSERT fever.
To insert the characters instantaneously (Cut in)
Press the PGM CUT IN/OUT button. The button lights, and
the characters are instantaneously inserted into the
picture.
To insert the characters gradually (Fade in)
Move the INSERT lever from the PGM position to the
Downstream keyer
INSERT position. When the lever is started to move, the
PGM CUT IN/OUT button lights.
TO DELETE THE INSERTED LETTERS
> delete the inserted fetters on the preset monitor
"ess the PST CUT IN/OUT button. The added letters
sappear and the button will go out.
delete the inserted letters on the program monitor
1 delete instantaneously (Cut out)
ess the PGM CUT IN/OUT button. The inserted letters
sappear and the button goes out.
» delete gradually (Fade out)
ove the INSERT lever from the INSERT position to the PGM
sition. Atthe PGM position, the PGM CUT IN/OUT button
es out.
Advertisement
Table of Contents
