Table of Contents
Advertisement
' [3] BACKGROUND
COLOR section
——_—
46
Number keys
Designate the sticks, levers and controls used for the
transition and set to change the settings of the items of the
mode.
REM (remote) key
When the SEG-2550/2550P is controlied with external
equipment such as a microcomputer or a BVE-900 editing
control unit, press this key. The SEG-2550/2550P Is set in the
remote control mode, and the contro! mode is shown on the
display monitor.
MOD (mode) key
Press this key to display the mode menu. Erasing data,
tuming the buzzer on and off, auto increment of an event
number, and auto take of an event can be set.
C (clear) key
Press in the following cases.
* To display the E-File data after the power is tumed on.
° To display the E-File data by interrupting or terminating the
current mode.
BACKGROUND COLOR stick
Adjusts the hue of the background color by rotating and the
chroma level by tilting.
This stick is activated when the BACKGROUND button of the
PST bus, A bus or B bus select button is pressed, and the
BACKGROUND selector is set to COL.
LUM (duminance) contro!
Adjusts the brightness of the background color. Clockwise
rotation brightens the color. Usually set the control within the
range as shown below. If the control is set outside the
indicated range, it is recommended to monitor the signal by a
waveform monitor.
Advertisement
Table of Contents
