Table of Contents
Advertisement
SPECIFICATIONS
Signal system
SEG-2550
EIA standards, NTSC color system
SEG.2550P
CGIR standards, PAL color system
Switching system Vertical blanking switcher
Effects
:
MIX
Mixing by PGMI/PST MIX lever and the EFF lever
'WIPE
137 wipe patterns (selectable)
Wipe edge: The softness is continuously
varlabie,
Border: Hue, chroma, luminance and width are
continuously variable.
Pairing: Scanning lines 2 lines {ines/4 lines
(selectable)
Echo: Possible
.
WEX:2000/2000P wipe pattem extender is usable.
EXTWIPE IN connector:
6-pin DIN
Output signal (6-pin DIN only): HD, VO,4 Vp-p,
75ohms, unbalanced
input signal (BNC and6-pin DIN): 0.7 V pp
(video) or 1 V p-p (VS), 75 ohms, unbalanced
EXTKEY connector:
BNCtype and6pinDIN,
©
with 75-ohm termination switch
2
Slicer clrcutt is included (Clip level is variable).
DOWNSTREAM KEYER
Output signal (6-pin DIN only}: HD, VD, 4 V p-p,
75ohms, unbalanced
Input signal (BNC and6-pin DIN): 0.7 Vp-p
(video) or 1 V p-p (VS), 75 ohms, unbalanced
DSK KEY connector: BNC type and 6-pin DIN,
with 75-ohm termination switch
Shadow:
Wide and narrow (Selectable)
Edge: Variable
Color matte:
Continuously variable, -
Chroma:
Approx. 0-700 mV p-p (variable
according to the hue level)
Hue: 0°-360°
Luminance ({Y)}: Approx. 50-700 mV
Slicer circuit is included. (The clip levelis
variable.)
BACKGROUND COLOR
Chroma:
Approx.0- 700 mV p-p (variable
according to the hue level}
Hue:
0°-360°
Luminance (¥): Approx. 50-700 mV
Continuously variable
EXT WIPE
" EXT KEY
input signais
:
VIDEOIN1—8
BNCtypex8
0.7 V p-p (VB) or 1 V p-p (VBS), 75 ohms,
unbalanced, with 75-ohm termination switches
(The INDICATION selector does not function
with
the VB input signal)
BNC type 1
0.3 V/0.3 V (BS) or 1 V p-p(VBS), with 75-ohm
termination switch
DSK INSERTIN
BNCtypex!
1Vp-p(VS)
6pin DIN x1
GEN LOCKIN
EXT WIPE IN
60
Output signals
VIDEO OUT 1—8
BNGtypex8
.
1V p-p (VBS), 75 ohms, unbalaced (loop-through
output of the corresponding VIDEO IN
connector)
PGMOUT1-3
BNCtypex3
1 Vp-p (VBS), 75 ohms, unbalanced
PSTOUT1,2
BNCtypex2
1V p-p (VBS), 75. chms, unbalanced
GEN LOCK OUT BNC type 1
(toop-through output of GEN LOCK IN connector)
BNC typex1
1 Vp-p (VS), 75 ohms, unbalanced
BLACK BURST OUT 1 -4
BNC typex4
0.3 V/0.3 V p-p (BS), 75 ohms, unbalanced
DSP OUT
Tallyfintercom
TALLV/INTERCOM 1 —
4:4-pin DIN x4
TALLY/INTERCOM 5 — 8 CCJ connector (10 pin)
x1
Maximum pick-up value ina relay: 24 V 200 mA
oc
Trigger
TRIGGER:
Special minijackx1
TAKE function by earth
(OPEN: +5 V, impedance 65 kohms)
RS-232C
9600 baud (fixed), DTE (termina),
Signal level: +9V
Protocol for SEG-2550/2550P
Performance
DG
Less than 1%
DP
Less than 1° (APL 10 - 90%)
Crosstalk (SEG-2550:
3.58 MHz, SEG-2550P:
4.43 MHz}
Over -50 dB
Frequency response
8 MHz +0.5 dB
Signal'to noise ratio
Over —60 dB
Power requirements
SEG-2550
120
VAC +10%, 60 Hz+10%,
SEG-2550P
220 - 240 V AC +10%, 50/60 Hz +10%
Power consumption
:
SEG-2550: 82 W
:
SEG-2550P. 92 W
Operating temperature
:
0C° to 40C° (32°F to 104°F)
Dimensions
Approx. 481
155.5 x 310.4 mm (w/h/d)
(19 6Y/ex 1244 inches)
Weight
Approx. 14.5 kg (31 Ib 15 02)
Supplied accessories
AG POWE COLT 2... csccsssssccsosssssssreneecerteneotesesenecceersenssaee #
Wipe pattern St ......secssscsmcosoccconssscesssvsanseescnessensooons 1
CGJ connector for tally/nterCom......ceseseernssnnee 1
RA iain csnscnsanssnnsninssvnusascsoumstbesevescesaconnuwsssaseie 1
Advertisement
Table of Contents
