Table of Contents
Advertisement
1. In the "ENTER YOUR PIN" screen, hold button 2 and 3 (middle and lower)
simultaneously for 5 seconds.
2. Enter the current PIN (factory default = "123").
3. Enter your new PIN.
4. Enter your new PIN again to confirm.
5. Your new PIN is now set, please restart the bike to make sure it works.
2.5 Charging
When charging the bike, do the following steps. ALWAYS read the
charging manual before charging.
Charging Process and Environment
DANGER: Disconnect the charger immediately after charging. Charge and
store the battery in a dry environment. Never charge in temperatures below
0°C or near flammable materials. Do not leave the battery unattended while
charging. If the product shows signs of bulging or other issues, stop using
it immediately. Do not cover the product while charging. In case of battery
leakage, avoid contact and seek medical attention.
Pre-Charging Checks
Always inspect the battery for visible damage to the mechanical housing
and connectors. Contact Cake if damage is observed and do not charge.
If the battery display doesn't light up, refrain from charging and contact
Cake. Never charge below 0 °C or in direct sunlight. Never charge above
35°C or immediately after riding; wait at least 1.5 hours. Always charge in a
well-ventilated area. If charging fails to initiate, wait 1 hour before retrying.
Contact Cake if issues persist.
Do not attempt to charge the battery if you have experience any of the
following conditions:
•
Range is significantly reduced.
•
The bike shuts down randomly.
•
You cannot turn off the bike with the power button of the bike.
•
Power is reduced.
if any of these problems occur please contact CAKE customer service
Advertisement
Table of Contents
