Level 1 and 2 Service Manual
Replacing the CLI and Main Display Lens
G
6809509A88-O
14. Replace the hinge grommet into the gap between the flex and the flip housing
(see Figure 36).
Figure 36. Replacing the Hinge Grommet
15. Replace the display module assembly, flip assembly cover, transceiver board
assembly, antenna, rear housing, SIM, battery, and battery cover as described
in the procedures.
It is mandatory that the following special tools must be used when
following this procedure:
K3 Lens and Trim Ring Press Tool – part number 0-00-00-40863
Generic Press Fixture – part number 19501980
Available at the AMS Online-shop 62.214.1.200 (for access please contact your local
Motorola parts representative)
1.
Place and align the main lens, the CLI lens, and the trim ring onto the flip
assembly.
February 02, 2007
Disassembly
061687o
49