Disassembly
Removing and Replacing the Antenna Assembly
30
1.
Remove the battery cover, battery, SIM, and rear housing assembly,
transceiver PC board assembly, as described in the procedures.
2.
Turn the transceiver board assembly over so that the keypad mylar is facing
upward.
3.
Use the pointed end of the disassembly tool to release the antenna assembly
latch on each side of the transceiver board assembly.
Disassembly tool
Figure 12. Removing the Antenna Assembly Latches
February 02, 2007
Antenna assembly latch
Transceiver PCB assembly
Antenna assembly latch
K3
070038o
6809509A88-O