Troubleshooting And Warranty - Haier XS 4A4M4PB User Manual

19. TROUBLESHOOTING AND WARRANTY

If you believe the dishwasher is not working correctly, consult the quick guide provided
below with some practical tips on how to fix the most common problems. If the
malfunction continues or recurs, contact the Technical Assistance Centre.
BUG REPORTS
Models with a display: errors are reported by a number preceded by the letter "E"

(e.g. Error 2 = E2) and a short audio signal.
Models without a display: an error is shown by a sequence of flashes of every LED.

The error code is shown by the number of flashes followed by a pause of 5 seconds
(example: two flashes – pause 5 seconds – two flashes – repeating = Error 2).
Only models with a display
Error displayed
"NO WATER" with a
short audio signal (only
on some models).
(Warning light present
only in some models)
ERROR E2
display) with a short
audio signal
ERROR E3
display) with a short
audio signal
ERROR E4
display) with a short
audio signal
ERROR E8
display) with a short
audio signal
ERROR E18
display) with a short
audio signal
Meaning and solutions
The dishwasher does not fill with water
Make sure the water supply is open.
Make sure the water supply hose is not bent or crushed.
Make sure the drain pipe is at the proper height (see installation
section).
Close the water supply, unscrew the drain pipe from the back of the
(with
dishwasher and check that the "sand" filter is not clogged.
The dishwasher does not drain water
(with
Make sure the drain pipe isn't bent, trapped or blocked, and the filter
is not clogged.
Make sure the siphon is not clogged.
Water leak
(with
Make sure the drain pipe isn't bent, trapped or blocked, and the filter
is not clogged.
Make sure the siphon is not clogged.
The water heating element is not working correctly or the filter
(with
plate is clogged
Clean the filter plate.
(with Water level problems; check clogged filter plate.
Clean the filter plate.
44