Table of Contents
Advertisement
"AUTOMATIC" programmes
Models with Smart Loading Sensor
The "SMART AI - SMART AI PRO"
programme automatically sets the ideal
temperature and washing time, optimising
water and electricity consumption, thanks to
an algorithm that analyses the real-time
dirtiness of the dishes.
Models with dirt sensor
(Only on some models).
The dishwasher is equipped with a dirt
sensor,
capable
murkiness
during
programme phases (see programme
list). This device automatically adapts the
wash cycle parameters to the actual
quantity of dirt on the dishes, since water
murkiness is linked to the quantity of dirt on
the dishes. Thus, excellent washing results
are guaranteed while optimising water and
energy consumption.
"IMPULSE" or "INTERMITTENT"
programmes (only on some
models)
Some programmes use an impulse or
intermittent washing system (depending on
the model), which reduces consumption,
noise and improves performance.
The "intermittent" working of the washing
pump is NOT to be considered a
malfunction; it is a characteristic of
impulse
washing,
should be considered a normal feature
of the programme.
Interrupting a Programme
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to
add
dishes)
automatically. Close the door, without
pressing any buttons. The cycle will start
from where it left off.
of
analysing
water
all
"AUTOMATIC"
and
therefore
the
machine
stops
WARNING:
If you open the door during the drying
cycle, an intermittent buzzer signal
advises you that the drying cycle has
not yet finished.
Changing a running programme
If you want to cancel and change a
programme that is already in progress,
proceed as follows:
1. Open the door.
2. Press and hold the "START/RESET"
button for at least 3 seconds.
3. The countdown appears on the display
"3 -2 -1" while the "RESET" button is
held down.
4. "RESET" will appear on the display and
beeps will sound.
5. The programme in progress will be
cancelled and the "ECO" programme,
or the programme you have decided to
use,
appears
memorising it when the dishwasher is
switched on.
6. At this point you can set a new
programme.
WARNING:
Before starting a new programme, you
should
check
detergent
in
necessary, top up the detergent.
End of the programme
The end of the programme will be indicated
by 3 signals lasting 3 seconds, interspersed
with a pause of 20 seconds, after one
minute the dishwasher will switch off. At the
same time the word "END" will appear on
the display for one minute.
29
on
the
display,
that
there
is
still
the
dispenser.
If
Advertisement
Table of Contents
