Samsung Max Heat DVM S2 Technical Data Book page 62

10. Installation
Refrigerant pipe installation
Pipe installation for an outdoor unit
1 Direction of the pipe Refrigerant pipe can be withdrawn from the front, left and right side. Take necessary
method to install the pipes according to the condition of the installation site.
CAUTION
• Caution for using knock-out hole
• Make sure to prevent any damages on the exterior of the outdoor unit.
• Remove all burrs around the knock-out hole and apply varnish on the cross section and edges of the knock-
out hole to prevent rust.
• Use a cable protection tube and bushing to prevent a cable from being damaged when passing through a
knock-out hole.
Left side Front side
connection connection
Knock-out
hole
Right side
connection