Table of Contents
Advertisement
Alternatively:
1. Rotate the selector knob to the
2. Wait for 1 second. The display shows
3. Set the programme.
10.4 At the end of the programme
When the programme is completed:
• An intermittent acoustic signal operates.
• The display shows
• The indicator
• The indicators
• The Start/Pause indicator is on.
The appliance continues to operate with the anti-crease phase for
approximately 30 minutes or more if Extra Anticrease option was
set (see chapter
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-crease phase is
completed. We recommend, for better results, that you remove the
laundry when the phase is almost completed.
When the anti-crease phase is completed:
• The display still shows
• The indicator
• The indicators
• Start/Pause indicator goes off.
1. Press the on/off button to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter and empty the water container when
a programme is completed.
is on.
Filter and
Option - Extra Anticrease ).
is off.
Filter and
"Reset" position.
Tank may come on.
Tank remain on.
DAILY USE
.
31/52
Advertisement
Table of Contents
