Table of Contents
Advertisement
Antenna power supply
The device can power an antenna amplifier with 5V DC voltage.
• To power the amplifier with 5VDC, switch with the up/down arrow buttons to
the "Antenna Power" position.
• Using the left/right arrow buttons, select "on" to activate the power supply or
select "off" to deactivate the power supply.
• By default, the antenna power is turned off. Before turning on the power,
please check the specification of the built-in antenna amplifier.
4.6 Time
This menu is used to set the time, region, and allows you to automatically turn
off/on the decoder at a specified time. Additionally, you can find here options
related to timers for recording and changing programs.
Date and time
The receiver can automatically acquire the time and date from the signal
or you can set the time manually (recommended). When using GMT, select the
appropriate time shift value (e.g. +12 hours for New Zealand) and enable or disable
Summertime (daylight saving time), depending on the time of year.
Advertisement
Table of Contents
