Removing Power Supply - Supermicro SYS-221BT-HNC8R Disassembly Instructions Manual

6. Use a cross screwdriver to remove the screws and lift off the PCB
No. Description
2.1 Dummy Tray
2.2 Hard Drive
2.3 Hard Drive Enclosure
2.4 Hard Drive PCB

3. Removing Power Supply

1. Press the release tab on the failed power supply.
2. Use the handle to gently slide the power supply out the back of the chassis.
3. Remove the screw from the enclosure
3.1
9
2.4
3.2