Table of Contents
Advertisement
1
2
Roland test
Phones
Volume
o #.
AC
1,.Phones (headphones) Jack
This is for connecting headphones. Sound stil] comes out of the
Output L/R jacks even when headphones are plugged in.
2.Volume Knob
Output 1 L/R jacks and the headphones jack.
3.Display
Shows the numbers assigned to Patches and the values of para-
meters. It also displays messages in the event of an error.
4.Patch Button
When this button is pressed, the indicator will light and the unit
will be in Patch Select mode.
5.Mute Button
To stop a Part from sounding, press this button and the indicator
for this button will light.
6.Monitor Button
Parts for which the indicator on this button is lit will sound — all
other Parts will be silent.
7.Part Button
8.Value Buttons
9.Select Button
10.Select Indicator
11.Function Buttons
Use these buttons to select the various parameters.
12.Power Switch
This is used to switch the power on and off.
13.AC Jack
Insert the power cord included with the unit into this jack, and
plug the other end into an AC power outlet
14.MIDI Connectors
MIDI In A, B:
Receives messages from external MIDI devices.
MIDI Out/Thru:
15.Output 1 L/R Jacks
In most situations, you will connect an amp to these jacks.
16.Output 2 L/R Jacks
* At the factory settings, no sound will be sent from Output 2.
* It is not possible to adjust the volume of the OUTPUT 2 L/R
jacks using the Volume Knob.
co
erat
ene
Advertisement
Table of Contents
