HPE Synergy 12000 Frame Installation Instructions page 2

Procedure
1. Using the 2 hex thread-forming screws, install the bracket
on the frame.
Tighten the screws to 15lb-in of torque.
1
2
2
2. Use two nuts to connect the cable to the bracket.
2
1
3. Using the screw supplied with the rack, connect the cable
to the grounding rail.
1
2
Installing the DC power grounding kit
(no bracket)
Prerequisites
The following tools are required to complete this procedure:
• T-30 Torx screwdriver
• 8 mm socket wrench
About this task
For clarity, the rack is not shown in the images of this
procedure.
Procedure
1. Using one hex thread-forming screw and lock washer,
connect the grounding cable to the frame.
Tighten the screw to 15lb-in of torque.
1
2
2. Using the screw supplied with the rack, connect the
grounding cable to the grounding rail.
1
2
Documentation feedback
Hewlett Packard Enterprise is committed to providing
documentation that meets your needs. To help us improve
the documentation, send any errors, suggestions, or
comments to Documentation Feedback
(docsfeedback@hpe.com). When submitting your
feedback, include the document title, part number, edition,
and publication date located on the front cover of the
document. For online help content, include the product
name, product version, help edition, and publication date
located on the legal notices page.