Ricoh CIP Training Pro C9200 Series Manual page 28

CIP Training Pro C9200 series
Image Position (registration)
Here you can select to either adjust the front
side only or both sides. In this example, we will
select both sides.
30 test pages will be printed. The last page that
is printed is the results page. This shows the
results of the procedure and the new values that
will be applied to the device.
Press "Apply" to save the settings.
If you are happy with the paper registration, you
can end the process here.
If the registration needs further adjusting, you have
two choices.
1. Manual Adjustment of the registration.
2. Enable Image Position Feedback Correction.
If you enable Image Position Feedback Correction the test marks will be printed on the customer's job.
They will need to trim the job once printed.