Pantum M9106 Series User Manual page 94

3. Open the door C.
Note: • Make sure that the door does not hit any cables connected to the printer.
• If the 3000-sheet tray has been installed, slide the tray to the right to open the door.
• The inside of the printer may be very hot. To avoid being burned by heating components, please
wait for the surface to cool before touching the components.
4. Open the door D.
Note: • Door D will not be accessible until a 2 x 500-sheet tray is installed.
• If the 3000-sheet tray has been installed, slide the tray to the right to open the door.
79