Replace The Transfer Roller - Pantum M9106 Series User Manual

10. Insert the paper guide.
11. Fix the transfer belt.
12. Reinstall the door stop.
13. Close the door and power on the printer.

Replace the transfer roller

1. Open the door C.
Note: • Make sure that the door does not hit any cables connected to the printer.
• If the 3000-sheet tray has been installed, slide the tray to the right to open the door.
• The inside of the printer may be very hot. To avoid being burned by heating components, please wait
for the surface to cool before touching the components.
2. Remove the transfer roller.
85