Advertisement
Quick Links
JTECH-NS24 (JTD-793) and JTECH-EX-120M-UN-T/R (JTD-791 and
JTD-792) Quick Start Guide and J-Tech Digital App Setup
This guide will show you how to properly setup the JTECH-NS24 (ZT-IPS24) 24 Port AV over IP Switch
with the JTECH-EX-120M-UN-T (Transmitter) and R (Receiver). We will also show you how to connect
your Switch to the J-Tech Digital App.
JTD-791 Package Contents
•
• 1x HDMI Extender Transmitter
•
• 1x 5V DC Power Adapter
•
• 1x IR Cable Receiver
•
• 1x User Manual
JTD-793 Package Contents
•
1x User manual
•
1x Warranty Card
•
1x JTECH-NS24
•
2x Rackmount Ears
•
1x Power Cable
FRONT SIDE
BACK SIDE
JTD-792 Package Contents
•
• 1x HDMI Extender Receiver
•
• 1x 5V DC Power Adapter
•
• 1x IR Cable Transmitter
•
• 1x User Manual
1
Advertisement
Related Manuals for J-Tech Digital JTECH-NS24
Summary of Contents for J-Tech Digital JTECH-NS24
- Page 1 JTD-792) Quick Start Guide and J-Tech Digital App Setup This guide will show you how to properly setup the JTECH-NS24 (ZT-IPS24) 24 Port AV over IP Switch with the JTECH-EX-120M-UN-T (Transmitter) and R (Receiver). We will also show you how to connect your Switch to the J-Tech Digital App.
- Page 2 Diagram: Completed JTD-791, JTD-792 and JTD-793 Setup Default Switch Settings JTD-793 Default IP: 192.168.168.254 JTD-793 Default Username: admin Default Password: admin JTD-793 Default Input Ports: 1-11 Default Output Ports: 12-22 Default Management Ports: 23,24 HOW TO CONNECT THE TRANSMITTER (JTD-791) AND RECEIVER (JTD-792) TO THE SWITCH (JTD-793) 1)Connect the Transmitters to the Input Ports (1-11) via CAT 5E/CAT 6 cable and the Receivers to the Output Ports (12-22) via CAT 5E/ CAT 6.
- Page 3 HOW TO CONNECT YOUR SWITCH TO YOUR NETWORK 3) Connect your Computer via CAT5E/ CAT6 to your Wireless Router. 4) Check the Wireless Router’s Network Configuration by running Command Prompt on Windows or Terminal on MAC OS, enter “ipconfig” for Windows to get the Network Configuration. Enter “ifconfig” on the Terminal on MAC OS for the Network Configuration.
- Page 4 Note: Network Information on your setup will be different than displayed. 7) Set your Computer back to DHCP (obtain an IP address automatically) and connect your Computer back to your router. 8)Connect your J-Tech Switch directly to your router on port 23 or 24 in order to log back in to the web interface using the new IP.
- Page 5 Note: Network Information on your setup will be different than displayed. HOW TO CONNECT YOUR SWITCH TO THE J-TECH DIGITAL APP 11) Download the J-Tech Digital App from the Google Play Store (Android) or from the App Store (iOS). 12) Connect your phone or tablet to the same Wireless Router the Switch is on.
- Page 6 You can also save these “Port Routing” selections as their own “Modes” 15) You can perform “Port Routing” and “Mode” creation and “Mode” selection on the J-Tech Digital App.
- Page 7 Interface. By default, Ports P1-P11 are Input ports, P12-P22 are Output ports and P23 and P24 are Management Ports. 17) You can also save these as different “Modes” we have “Mode 1-4” so you can have presets for different uses. 18) You can also change the port settings from the J-Tech Digital App as well.