Specific Safety Instructions - ULTIMATE SPEED USML 3.7 A1 Operation And Safety Notes Translation Of The Original Instructions

liquids, gases or powders.
Do not expose the device to
„
any source of heat.
Do not store in places
„
where the temperature can
exceed 70 °C.
Do not connect the charging
„
cable to a faulty or unsuitable
socket, which, for example,
is not designed for the
continuous use required.
Protect the plug connections
„
and plug devices from
moisture and liquids.
Do not step on or drive over
„
plugs, charging cable and
connecting cables.
Do not jam or kink charging
„
and connection cables.
Do not touch plugs with
„
wet hands.
When the device is not being
„
used, always put the cover
caps on the plugs
8
The device must not be used
„
if it is not possible to operate
it properly in accordance
with the instructions. Ask the
manufacturer, a responsible
dealer or an electrician for
advice.
CAUTION: How to
avoid accidents and
injuries resulting from
Electrical safety:
Do not carry the device by
„
the cable. Do not unplug
the plug from the socket
by pulling on the cable.
Protect the cable from heat,
oil and sharp edges.
If the cable is damaged,
„
unplug the plug immediately
from the socket. A damaged
charging cable can lead to
death or serious injuries.
Before each use, check the
charging cable for damage
(e.g. cracks). Do not use
damaged charging cables.
Do not short circuit the
„
contacts on the T2 plug.
This can lead to a hazardous
situation!
Do not put fingers or sharp
„
objects into the plug contacts.
.
9
Do not hold the plug under
„
water or submerge it in water.
z Specific safety
instructions
Before operation, the device
„
carries out an automatic self
test and checks internal com-
ponents, possible residual
currents, over or under volt-
electric shock:
GB/IE/NI/CY/MT
11