Specific Safety Instructions - ULTIMATE SPEED ULGD 5.0 B1 Translation Of The Original Instructions

Safety instructions / Specific safety instructions
Do not operate the device near to flammable
„
liquids or gases. Failure to do so risks causing
a fire or explosion!
Switch the device off and remove the mains
„
plug from the socket in the following cases:
–
When you are not using the device;
–
If you are leaving the device unsupervised;
–
If you are doing cleaning work;
–
If the connection cable is damaged;
Only use the accessories supplied and
„
recommended by the manufacturer.
Do not disassemble or modify the car and
„
motorcycle battery charger. This device must
only be repaired by a maintenance technician.
Do not use the device in areas with a risk of
„
explosion, e.g. near flammable liquids, gases
or powders.
Do not expose the device to any source of heat.
„
CAUTION: How to avoid accidents and
injuries from electric shock:
Electrical safety:
Do not carry the device by the cable. Do not
„
unplug the plug from the socket by pulling on
the cable. Protect the cable from heat, oil and
sharp edges.
If the cable is damaged, unplug the plug
„
immediately from the socket.
z Specific safety instructions
A slightly higher temperature during charging
„
is absolutely normal and not a malfunction.
Protect the car and motorcycle battery charger
„
from moisture and high temperatures,
1
including fires.
44 GB/IE