Reflector Case Disassembly; Reflector And Body Case Separation; Body Case Disassembly - Vivitar 283 Service Manual

Automatic Electronic Flash
Model 283
Remove
Screw ~
Reflector
/ Case UB
Remove ---------
Screw
·~
Figure 3-2. Reflector Case Disassembly
Remove
Screws
C. Lay reflector case UB aside. Lift body case from reflector case UA and position as shown. Fig. 3-3.
Remove
Note
Reflector
Case UA
Figure 3-3. Reflector and Body Case Separation
0. Remove bounce angle detents, and screws from body case. Fig. 3-3.
E.
Lift back body case LB being careful not to touch main capacitor (C1) contacts or wiring on PC boards.
Fig. 3-4.
WARN ING
Opening the body case exposes the main capacitor C1 which presents a
serious shock hazard even when the power source is removed. Handle
the uni t with extreme caution until capacitor C 1 and capacitor C11 have
been fully d ischarged. (See Step F)
Figure 3-4. Body Case Disassembly
8
Vivitar 37 4 60598 (1 1/80)
•
•