Onkyo TX-NR906 Service Manual page 169

FIRMWARE UPDATE -7
Network Update Procedure (Continued)
9. Make sure that the target version is shown and press the cursor [
10. Press [ENTER] button to start update.
11. After update completes, Network function will automatically restart.
<e.g.>
12. Return the unit to the factory settings by holding down [VCR/DVR] button and the pressing [ON/STANDBY] button.
N E T F /W u p d a t e
S H 4 A P L :*8 7 0 2 a 0
N e t F / W u p d a t e
W r i ti n g .. .
SERVER
S t a r t u p.. .
U S B 1 /1
o U S B s to ra g e
www.audiodna.sk
] to add " * " on the left of the target version.
ATTENTION:
DURING WRITING, DO NOT TURN OFF THE POWER
BECAUSE REWRITING WILL BE IMPOSSIBLE.
TX-NR906/NA906