Onkyo TX-NR906 Service Manual page 167

FIRMWARE UPDATE -5
Preparation for Update (Video)
(Hardware and Software)
Preparation
1. Place an order for NAHDM-9114-1A.
Different Video FWs are used for TX-NR906/NA905, DTR-8.8, TX-NR906/NA906 and DTR-9.9.
Carefully select a correct part number and do not mix up the two boards.
It is highly recommended to provide the information of the model too, when any of these HDMI boards are ordered.
Model:
TX-NR906/NA906:
DTR-9.9:
TX-NR905/NA905:
DTR-8.8:
Video Update Procedure
1. Install HDMI Board NAHDM-9114-1A with the latest version of FW.
2. Turn on the unit and confirm the new version number.
Note: Video FW cannot be reloaded outside factory.
Part Number
1B170514-1A_0290A2
1B170514-1A_0292A2
1B170514-1A or 1B170514-1A_0223A2
1B170514-1A or 1B170514-1A_0252A2
www.audiodna.sk
TX-NR906/NA906