Table of Contents
Advertisement
Installation & Setup (cont.)
Shelf Adjustment
USER ACTION!
DO NOT adjust shelving until AFTER the installation
process is complete. Foam cylinders and caps MUST
be installed in the leveling leg holes. See fig 1. Please
see installation packet for more details
1. Remove the shelf shipping bracket, shelf cable ties, and
shipping tape. See figs. 2 and 3.
2. Lift the shelf assembly and then pull the shelf assembly
forward. See fig. 4.
3. Hook the shelf assembly into the shelf standards at the desired
height.
4. Repeat steps 1-3 for the remaining shelves.
TEC_TM_180 | REV. D | EN
RETAIL MERCHANDISER
A
Fig. 1.
Plugging (A) and capping (B) a leveling leg hole.
Fig. 2.
Shelf shipping bracket location. One bracket shown.
Fig. 3.
Shelf cable ties and shipping tape. Not all cable ties or tape shown.
A
Fig. 4.
Lift the shelf and pull forward.
12/11/2023
www.truemfg.com
B
B
Page 15 of 44
Advertisement
Table of Contents
