Page 2
SuperpanelPRO 30 and UltrapanelPRO 30 Instructions SuperpanelPRO 30 Softbox White Eggcrate UltrapanelPRO 30 Diffuser To use the softbox, open the velcro string at the edges of the panel and make sure to thighten it. (fig 1) fig. 1 Attention: please note this is the right way to mount the softbox on the SuperpanelPRO 30 or the UltrapanelPRO 30.
Page 3
Superpanel 60 Instructions Install the softbox on the Superpanel 60 (fig.1) The black velcro string goes to the back of the Superpanel and the white elastic string goes to the front to fix tightly the softbox. (fig 1) fig. 1 Tighten the elastic to close the gap between the softbox and the Dayled PRO until it’s fixed (fig.
Page 4
DayledPRO 650 and DayledPRO 1000 Instructions DayledPRO 650 Barndoors Softbox White DayledPRO 1000 Diffuser Tighten the elastic to close the gap between the softbox and the Dayled PRO until it’s fixed (fig. 2). To tighten the string pull it through the hole and hold it. (fig.
Page 5
FULL and HALF diffuser are needed to expand differently the light and can be attached at the softbox through the velcro edges. Lupo srl Via V. Sassi 28/30 - Collegno (TO) - 10093 - Italy phone: +39 011 411 9919 / e-mail: contact@lupo.it website: www.lupo.it...
Need help?
Do you have a question about the UltrapanelPRO 30 and is the answer not in the manual?
Questions and answers