1. Manuals
  2. Brands
  3. Lupo Manuals
  4. Lighting Equipment
  5. UltrapanelPRO Dual Color Hard 30
  6. User manuals

Lupo UltrapanelPRO Dual Color Hard 30 User Manuals

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SuperpanelPRO 30
SuperpanelPRO 60
UltrapanelPRO 30
UltrapanelPRO 60
ActionpanelPRO
DayledPRO
DayledPRO 650 / Dual Color 650 / Full Color 650
DayledPRO 1000 / Dual Color 1000 / Full Color 1000
DayledPRO 2000 / Dual Color 2000 / Full Color 2000
DayledPRO 3000 / Dual Color 3000 / Full Color 3000
MovielightPRO
Monocolor / Dual Color / Full Color
User Manuals
Release 8.xx
Full Color / Dual Color
Full Color / Dual Color
Full Color / Dual Color
Full Color / Dual Color
Full Color / Dual Color

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UltrapanelPRO Dual Color Hard 30 and is the answer not in the manual?

Questions and answers

Related Manuals for Lupo UltrapanelPRO Dual Color Hard 30

Summary of Contents for Lupo UltrapanelPRO Dual Color Hard 30

  • Page 1 User Manuals Release 8.xx SuperpanelPRO 30 Full Color / Dual Color SuperpanelPRO 60 Full Color / Dual Color UltrapanelPRO 30 Full Color / Dual Color UltrapanelPRO 60 Full Color / Dual Color ActionpanelPRO Full Color / Dual Color DayledPRO DayledPRO 650 / Dual Color 650 / Full Color 650 DayledPRO 1000 / Dual Color 1000 / Full Color 1000 DayledPRO 2000 / Dual Color 2000 / Full Color 2000 DayledPRO 3000 / Dual Color 3000 / Full Color 3000...

  • Page 2: Safety Precautions

    Thanks for having purchased Lupo products. All the products are made in Italy and all the efforts have been put to keep the quality standards high. We hope this product can help you in your job and make your life easier as a professional.
  • Page 3 Index UltrapanelPRO 30 Cod. 800 PRO UltrapanelPRO Dual Color Hard 30 pg. 5 Cod. 810 PRO UltrapanelPRO Dual Color Soft 30 pg. 5 Cod. 817 PRO UltrapanelPRO Full Color Hard 30 pg. 13 Cod. 815 PRO UltrapanelPRO Full Color Soft 30 pg.
  • Page 4 User Manuals UltrapanelPRO Dual Color Hard 30 800 PRO UltrapanelPRO Dual Color Soft 30 810 PRO SuperpanelPRO Dual Color Hard 30 400 PRO SuperpanelPRO Dual Color Soft 30 410 PRO...
  • Page 5 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...

  • Page 6: Control Panel

    CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.

  • Page 7: Dmx Protocol

    press push button to confirm the selection. DMX BIT: Resolution of the DMX control. 8bit 1 channel per function and 16 bit 2 channels per function. 1. Select the DMX BIT item by pressing the push button. 2. Rotate the knob to choose between 8bit / 16bit, press the push button to confirm the selected setting.

  • Page 8: Protocol Specification

    Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color Dayled 2000 mono color Dayled 2000 dual color...
  • Page 9 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...

  • Page 10: Device Settings

    DEVICE SETTINGS 1. Press the push button to enter the main MENU. 2. Navigate through the MENU rotating the button, select DEVICE SETTINGS, press the push button to confirm the selection. 3. Navigate through the MENU rotating the button, select GENERAL, press the push button to confirm the selection.
  • Page 11 Package Contents for SuperpanelPRO 30 and UltrapanelPRO 30 AC Power Cord Cable ATTENTION: Please keep the original package of the product in a safe place for warranty reasons. MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK"...
  • Page 12 User Manuals UltrapanelPRO Full Color Hard 30 817 PRO UltrapanelPRO Full Color Soft 30 815 PRO SuperpanelPRO Full Color Hard 30 418 PRO SuperpanelPRO Full Color Soft 30 415 PRO...
  • Page 13 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...
  • Page 14 CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 15 DMX OPERATIONS - Advanced Settings 1. Press the push button to enter the main MENU. 2. Navigate through the main MENU with the knob until DEVICE SETTINGS and press the push button to confirm selection. 3. Rotate the knob to select DMX ADVANCED, press the push button to confirm selection.
  • Page 16 1. DIMMER 0 - 255 0 ÷ 100 % 2. HUE 0 ÷ 253 0 ÷ 360 3/4* 0 ÷ 255 0 ÷ 100 % 3. SATURATION 4. *STROBE CONTROL 0 ÷ 255 0 - 25 Hz 1. DIMMER 0 - 255 0 ÷...
  • Page 17 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 18 DEVICE MODEL Text description of up to 32 characters for the device 0x0080 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name.
  • Page 19 Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default SOFTWARE VERSION LABEL 0x00C0 Retrieves software version string of main software DMX512 Setup DMX PERSONALITY 0x00E0 DMX mode DMX PERSONALITY 0x00E1 Shows a description of a DMX-Mode, max 32 characters...
  • Page 20 RESET DEVICE 1. Press the « OK » button to enter the main MENU. 2. Select RESET DEVICE rotating the button, press the push button to confirm the selection. 3. Select YES rotating the button, press the push button to confirm the selection. 4.
  • Page 21 MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. EXIT INFO MODE CONTROL DEVICE SETTINGS RESET DEVICE ON/OFF FAN POWER BACK CCT MODE MANUAL BACK 30 SEC HSI MODE RDM ADDRESS 1 MIN DISPLAY...
  • Page 22 User Manuals UltrapanelPRO Dual Color Hard 60 804 PRO UltrapanelPRO Dual Color Soft 60 814 PRO SuperpanelPRO Dual Color Hard 60 404 PRO SuperpanelPRO Dual Color Soft 60 414 PRO...
  • Page 23 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.

  • Page 24: Dmx Operation

    CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 25 DMX OPERATION 1. Press the push button to enter the main MENU. 2. Select CONTROL with the knob and press the push button to confirm selection. 3. Select DMX with the knob and press the push button to confirm selection. 4.
  • Page 26 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 27 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 28 DMX512 Setup DMX PERSONALITY 0x00E0 DMX mode DMX PERSONALITY 0x00E1 Shows a description of a DMX-Mode, max 32 characters DESCRIPTION DMX START ADDRESS 0x00F0 DMX address Control IDENTIFY DEVICE 0x1000 The identify flag (flashes the light) Manufacturer Commands FAN MODE 0x8001 0: Off 1: On DISPLAY TIMEOUT...
  • Page 29 FACTORY DEFAULT SETTING MODE DEVICE SETTINGS FAN: ON DMX OPERATION DISPLAY: 1 min BIT: 8 BIT FILTER : Normal speed DMX SIGNAL LOSS: Settings 1 MIN LINEARIZATION: Linear RDM ENABLE: OFF FREQUENCY: 18 KHz INV - CCT: OFF CONTROL Manual DMX OPERATION - DMX protocol The SuperpanelPRO and the UltrapanelPRO can be used with 8 bit (1 channel per function) and 16 bit (2 channels per function).
  • Page 30 Package Contents for SuperpanelPRO 60 and UltrapanelPRO 60 AC Power Cord Cable ATTENTION: Please keep the original package of the product in a safe place for SuperpanelPRO 60 / UltrapanelPRO 60 warranty reasons. MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK"...
  • Page 31 User Manuals UltrapanelPRO Full Color Hard 60 818 PRO UltrapanelPRO Full Color Soft 60 816 PRO SuperpanelPRO Full Color Hard 60 419 PRO SuperpanelPRO Full Color Soft 60 416 PRO...
  • Page 32 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 33 CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 34 BLUETOOTH 1. Press the push button to enter the main MENU. 1. Select CONTROL with the knob and press the push button to confirm selection. 2. Select BLE with the knob and press the push button to confirm selection. DMX OPERATION - Advanced Settings 1.
  • Page 35 DMX Channel Protocol - 8 bit MODE CHANNELS DMX CHANNEL POSITION DMX VALUE VALUE 1. DIMMER 0 - 255 0 - 100 % 2. COLOR TEMPERATURE 0 - 255 6500 - 2700 0 ÷ 5 Ø 3/4* 3. GN COMPENSATION 6 ÷...
  • Page 36 8. *STROBE CONTROL - byte 2 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color...

  • Page 37: Status Messages

    Dayled 1000 dual color Dayled 2000 mono color Dayled 2000 dual color Superpanel 30 dual color soft Superpanel 30 dual color lens Superpanel 30 full color soft Superpanel 30 full color lens Superpanel 60 dual color soft Superpanel 60 dual color lens Superpanel 60 full color soft Superpanel 60 full color lens Actionpanel dual color soft...
  • Page 38 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 39 FULL SPEED / NORMAL SPEED / HIGH SPEED / LOW SPEED. Linearization: Linearization is the compensation curve for the human eye's perception of the luminous intensity emitted as a function of the required power. Required power = dimmer value on the display. LINEAR / EXPONENTIAL / LOGARITHMIC. Linear: No compensation, the intensity of the light is directly proportional to requested power.
  • Page 40 USB port Use USB port for firmware updates. Update the Firmware 1. Copy the file on an USB Pendrive (FAT32 formatted) in the main root; 2. Switch off the equipment and insert the USB Pendrive; 3. Switch on the equipment; 4.
  • Page 41 MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. EXIT MODE CONTROL DEVICE SETTINGS RESET DEVICE INFO ON/OFF FAN POWER BACK CCT MODE MANUAL BACK 30 SEC HSI MODE RDM ADDRESS 1 MIN DISPLAY...
  • Page 42 User Manuals ActionpanelPRO Dual Color Hard 600 PRO ActionpanelPRO Dual Color Soft 603 PRO...
  • Page 43 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...
  • Page 44 CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 45 1. press push button to confirm the selection. DMX BIT: Resolution of the DMX control. 8bit 1 channel per function and 16 bit 2 channels per function. 1. Select the DMX BIT item by pressing the push button. 2. Rotate the knob to choose between 8bit / 16bit, press the push button to confirm the selected setting.
  • Page 46 Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color Dayled 2000 mono color Dayled 2000 dual color...
  • Page 47 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...

  • Page 48: Factory Default Setting

    DEVICE SETTINGS 1. Press the push button to enter the main MENU. 2. Navigate through the MENU rotating the button, select DEVICE SETTINGS, press the push button to confirm the selection. 3. Navigate through the MENU rotating the button, select GENERAL, press the push button to confirm the selection.
  • Page 49 Package Contents for ActionpanelPRO AC Power Cord Cable ATTENTION: Please keep the original package of the product in a safe place for warranty reasons. MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. EXIT INFO MODE...
  • Page 50 User Manuals ActionpanelPRO Full Color Hard 602 PRO ActionpanelPRO Full Color Soft 604 PRO...
  • Page 51 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...
  • Page 52 CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 53 DMX OPERATIONS - Advanced Settings 1. Press the push button to enter the main MENU. 2. Navigate through the main MENU with the knob until DEVICE SETTINGS and press the push button to confirm selection. 3. Rotate the knob to select DMX ADVANCED, press the push button to confirm selection.
  • Page 54 1. DIMMER 0 - 255 0 ÷ 100 % 2. HUE 0 ÷ 253 0 ÷ 360 3/4* 0 ÷ 255 0 ÷ 100 % 3. SATURATION 4. *STROBE CONTROL 0 ÷ 255 0 - 25 Hz 1. DIMMER 0 - 255 0 ÷...
  • Page 55 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 56 DEVICE MODEL Text description of up to 32 characters for the device 0x0080 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name.
  • Page 57 Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default SOFTWARE VERSION LABEL 0x00C0 Retrieves software version string of main software DMX512 Setup DMX PERSONALITY 0x00E0 DMX mode DMX PERSONALITY 0x00E1 Shows a description of a DMX-Mode, max 32 characters...
  • Page 58 RESET DEVICE 1. Press the « OK » button to enter the main MENU. 2. Select RESET DEVICE rotating the button, press the push button to confirm the selection. 3. Select YES rotating the button, press the push button to confirm the selection. 4.
  • Page 59 MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. EXIT INFO MODE CONTROL DEVICE SETTINGS RESET DEVICE ON/OFF FAN POWER BACK CCT MODE MANUAL BACK 30 SEC HSI MODE RDM ADDRESS 1 MIN DISPLAY...
  • Page 60 User Manuals DayledPRO 650 300D PRO / 300T PRO / 303 PRO Dual Color DayledPRO 1000 301D PRO / 301T PRO / 304 PRO Dual Color DayledPRO 2000 302D PRO / 302T PRO / 305 PRO Dual Color...
  • Page 61 Instructions • Max input current for daisy chain: 15 A • Device for indoor use only. • Protection standard IP20. • Maximum ambient temperature: 45 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 62 DayledPRO Full Color 1000 Locking knob Tilt lock knob DMX INPUT (Male 5 PIN XLR) Barndoors Battery connector screw lock (Male 4 PIN XLR) DMX THROUGH (Female 5 PIN XLR) Barndoors bracket POWERCON IN POWERCON OUT (Max 15 A) ON/OFF FUSE (15 A) CCT knob...
  • Page 63 NOTE: The symbol - ! - on the display indicates that there is no DMX signal. BLUETOOTH 1. Press the push button to enter the main MENU. 1. Select CONTROL with the knob and press the push button to confirm selection. 2.
  • Page 64 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 65 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 66 Manufacturer Commands FAN MODE 0x8001 0: Off 1: On DISPLAY TIMEOUT 0x8002 0: 30 sec 1: 1 min 2: always on DMX SIGNAL LOST MODE 0x8003 0: black out 1: last settings on 2: last settings 1 min DMX BITS 0x8004 0: 8 bit 1: 16 bit CCT LIMIT...
  • Page 67 DayledPRO 650 / 1000 95 Wh battery (cod.271) Dayled 2000 160 Wh battery (cod.271) Battery charger (cod.272) This batteries allowS to power all Lupo This charger works with models with AC/DC functioning. Lupo 95 Wh and 160 Wh batteries. V – Mount clamp (cod.320)
  • Page 68 MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. EXIT MODE CONTROL DEVICE SETTINGS RESET DEVICE INFO ON/OFF FAN POWER BACK CCT MODE MANUAL BACK 30 SEC 5600 RDM ADDRESS 1 MIN DISPLAY...
  • Page 69 User Manuals DayledPRO 3000 309D PRO / 309T PRO / 310 PRO...
  • Page 70 Instructions • Max input current for daisy chain: 15 A • Device for indoor use only. • Protection standard IP20. • Maximum ambient temperature: 45 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 71 CCT MODE: Warm and cold white control mode. It allows you to adjust colour temperature (CCT), and light intensity. This is the default setting. ATTENTION: Rotating the knob changes the CT value- Pressing button select GN value that can be changed by rotating the same knob.
  • Page 72 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...

  • Page 73: Status Messages

    Dayled 2000 mono color Dayled 2000 dual color Superpanel 30 dual color soft Superpanel 30 dual color lens Superpanel 30 full color soft Superpanel 30 full color lens Superpanel 60 dual color soft Superpanel 60 dual color lens Superpanel 60 full color soft Superpanel 60 full color lens Actionpanel dual color soft Actionpanel dual color lens...
  • Page 74 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 75 EXPONENTIAL / LOGARITHMIC. Linear: No compensation, the intensity of the light is directly proportional to requested power. Exponential: The light intensity increases from 0 to 100 exponentially. Logarithmic: The light intensity increases from 0 to 100 logarithmically. CCT Limit: CCT range 2800 - 6500 or 3200 - 5600 RESET DEVICE 1.
  • Page 76 DayledPRO 650 / 1000 95 Wh battery (cod.271) Dayled 2000 160 Wh battery (cod.271) Battery charger (cod.272) This batteries allowS to power all Lupo This charger works with models with AC/DC functioning. Lupo 95 Wh and 160 Wh batteries. V – Mount clamp (cod.320)
  • Page 77 User Manuals DayledPRO Full Color 650 306 PRO DayledPRO Full Color 1000 307 PRO DayledPRO Full Color 2000 308 PRO...
  • Page 78 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...
  • Page 79 CONTROL PANEL - In current mode press the push button to enter the main MENU. - In the sub-menus press the push button to confirm a selection. - Rotate the knob to navigate in the main MENU and sub-menus. - Use the « INTENSITY » knob to adjust the light intensity from 0 to 100%.
  • Page 80 DMX OPERATIONS - Advanced Settings 1. Press the push button to enter the main MENU. 2. Navigate through the main MENU with the knob until DEVICE SETTINGS and press the push button to confirm selection. 3. Rotate the knob to select DMX ADVANCED, press the push button to confirm selection.
  • Page 81 1. DIMMER 0 - 255 0 ÷ 100 % 2. HUE 0 ÷ 253 0 ÷ 360 3/4* 3. SATURATION 0 ÷ 255 0 ÷ 100 % 4. *STROBE CONTROL 0 ÷ 255 0 - 25 Hz 1. DIMMER 0 - 255 0 ÷...
  • Page 82 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 83 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 84 DMX512 Setup DMX PERSONALITY 0x00E0 DMX mode DMX PERSONALITY 0x00E1 Shows a description of a DMX-Mode, max 32 characters DESCRIPTION DMX START ADDRESS 0x00F0 DMX address Control IDENTIFY DEVICE 0x1000 The identify flag (flashes the light) Manufacturer Commands FAN MODE 0x8001 0: Off 1: On DISPLAY TIMEOUT...
  • Page 85 RESET DEVICE 1. Press the « OK » button to enter the main MENU. 2. Select RESET DEVICE rotating the button, press the push button to confirm the selection. 3. Select YES rotating the button, press the push button to confirm the selection. 4.
  • Page 86 DayledPRO 650 / 1000 95 Wh battery (cod.271) Dayled 2000 160 Wh battery (cod.271) Battery charger (cod.272) This batteries allowS to power all Lupo This charger works with models with AC/DC functioning. Lupo 95 Wh and 160 Wh batteries. V – Mount clamp (cod.320)
  • Page 87 User Manuals DayledPRO Full Color 3000 311 PRO...
  • Page 88 Instructions • Device for indoor use only. • Maximum ambient temperature: 40 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling. •...
  • Page 89 1. In MODE menu select EFFECT MODE. 2. Select the EFFECT to be activated with rotate the button, confirm the selection by pressing the push button. 3. Use the knob to change the DIMMER and the knob to adjust the effect setting values. ATTENTION: Rotating the knob changes the CT value- Pressing button select GN...
  • Page 90 DMX Protocol Introduction The DayledPRO models can be used with 8 bit or 16 bit DMX control. (See DMX OPERATION - advanced settings in the user's manual). When used in 8 bit mode the panels uses one channel for each function. DMX values for each channel are in the range of 0 to 255.
  • Page 91 DMX Channel Protocol - 16 bit MODE CHANNELS DMX CHANNEL POSITION DMX VALUE VALUE 1. DIMMER - byte 1 0 - 65535 0 ÷ 100 % 2. DIMMER - byte 2 3. COLOR TEMPERATURE - byte 1 0 - 65535 6500 - 2700 4.
  • Page 92 Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color Dayled 2000 mono color Dayled 2000 dual color...
  • Page 93 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 94 DEVICE SETTINGS 1. Press the push button to enter the main MENU. 2. Navigate through the MENU rotating the button, select DEVICE SETTINGS, press the push button to confirm the selection. 3. Navigate through the MENU rotating the button, select GENERAL, press the push button to confirm the selection.
  • Page 95 DayledPRO 650 / 1000 95 Wh battery (cod.271) Dayled 2000 160 Wh battery (cod.271) Battery charger (cod.272) This batteries allowS to power all Lupo This charger works with models with AC/DC functioning. Lupo 95 Wh and 160 Wh batteries. V – Mount clamp (cod.320)
  • Page 96 MENU e submenus - Select “EXIT” to return to the current mode. - Select "BACK" to return to the previous menu. INFO EXIT MODE CONTROL DEVICE SETTINGS RESET DEVICE ON/OFF FAN POWER BACK CCT MODE MANUAL BACK 30 SEC HSI MODE RDM ADDRESS 1 MIN DISPLAY...
  • Page 97 User Manuals MovielightPRO 300 MovielightPRO Dual Color 300...
  • Page 98 Instructions • Max input current for daisy chain: 15 A • Device for indoor use only. • Protection standard IP20. • Maximum ambient temperature: 45 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 99 ATTENTION: Rotating the knob changes the CT value- Pressing button select GN value that can be changed by rotating the same knob. DMX OPERATIONS 1. Press the push button to enter the main MENU. 2. Select CONTROL with the knob and press the push button to confirm selection.
  • Page 100 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 101 Dayled 2000 dual color Superpanel 30 dual color soft Superpanel 30 dual color lens Superpanel 30 full color soft Superpanel 30 full color lens Superpanel 60 dual color soft Superpanel 60 dual color lens Superpanel 60 full color soft Superpanel 60 full color lens Actionpanel dual color soft Actionpanel dual color lens Actionpanel full color soft...
  • Page 102 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 103 Logarithmic: The light intensity increases from 0 to 100 logarithmically. CCT Limit: CCT range 2800 - 6500 or 3200 - 5600 RESET DEVICE 1. Press the « OK » button to enter the main MENU. 2. Select RESET DEVICE rotating the button, press the push button to confirm the selection.
  • Page 104 The items are also sold separately. Battery charger (cod.272) 160 Wh battery (cod.271) This charger works with This batteries allowS to power all Lupo Lupo 95 Wh and 160 Wh models with AC/DC functioning. batteries. V – Mount clamp (cod.320)
  • Page 105 User Manuals MovielightPRO Full Color 300...
  • Page 106 Instructions • Max input current for daisy chain: 15 A • Device for indoor use only. • Protection standard IP20. • Maximum ambient temperature: 45 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 107 LIGHT MODES MODE INTENSITY CCT/HUE GN/SAT/COLOR « » « » CT 2800K to 10000K GN -1.00 to +1.00 HUE 0º to 100º SAT 0 to 100% Light Intensity from 0 to 100% RGBW Select function R/G/B/W/CT/GN Change values of the function PRESET Change Preset CCT MODE: Warm and cold white control mode.
  • Page 108 1. Select the LOSS DMX SIGNAL item with the push button 2. Rotate the knob to select the device’s behaviour among BLACK OUT /SETTINGS LAST / SETTINGS 1min, press the push button to confirm the setting. Black out: The device switches off. Settings Last: The values of the last selected setting are maintained over time until the device is switched off.
  • Page 109 DMX Channel Protocol - 16 bit MODE CHANNELS DMX CHANNEL POSITION DMX VALUE VALUE 1. DIMMER - byte 1 0 - 65535 0 ÷ 100 % 2. DIMMER - byte 1 3. COLOR TEMPERATURE - byte 1 0 - 65535 6500 - 2700 4.
  • Page 110 Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color Dayled 2000 mono color Dayled 2000 dual color...
  • Page 111 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 112 BLUETOOTH 1. Press the push button to enter the main MENU. 2. Navigate through the MENU rotating the button, select DEVICE SETTINGS, press the push button to confirm the selection. 3. Navigate through the MENU rotating the button, select GENERAL, press the push button to confirm the selection.
  • Page 113 4. Wait until display backlight flashes (it takes several minutes and red led must toggle for all time long); 5. Switch off the equipment; 6. Extract the Pendrive and switch on the equipment: the firmware is updated. MENU e submenus - Select “EXIT”...
  • Page 114 User Manuals MovielightPRO Dual Color 600...
  • Page 115 Instructions • Max input current for daisy chain: 15 A • Device for indoor use only. • Protection standard IP20. • Maximum ambient temperature: 45 °C. • Make sure power supply plug is suitable to power required. • As prescribed by international regulations, a safety cable must be used when the fixture is suspended from ceiling.
  • Page 116 ATTENTION: Rotating the knob changes the CT value- Pressing button select GN value that can be changed by rotating the same knob. DMX OPERATIONS 1. Press the push button to enter the main MENU. 2. Select CONTROL with the knob and press the push button to confirm selection.
  • Page 117 1301 ÷ 65535 1 ÷ 25 Hz Protocol Specification COMMAND DESCRIPTION Manufacturer identification number Manufacturer ID 0x0622 (LUPO Lighting). Device Identification Model ID Model identification number Dayled 650 mono color Dayled 650 dual color Dayled 1000 mono color Dayled 1000 dual color...
  • Page 118 Dayled 2000 dual color Superpanel 30 dual color soft Superpanel 30 dual color lens Superpanel 30 full color soft Superpanel 30 full color lens Superpanel 60 dual color soft Superpanel 60 dual color lens Superpanel 60 full color soft Superpanel 60 full color lens Actionpanel dual color soft Actionpanel dual color lens Actionpanel full color soft...
  • Page 119 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 120 DESCRIPTION model type. This parameter provides an ASCII text response with the MANUFACTURER LABEL 0x0081 Manufacturer name for the device. “LUPO” is the default name. Set the device to its factory defaults. Get: Check if FACTORY DEFAULTS 0x0090 settings still in default state -> 1 if default...
  • Page 121 Logarithmic: The light intensity increases from 0 to 100 logarithmically. CCT Limit: CCT range 2800 - 6500 or 3200 - 5600 RESET DEVICE 1. Press the « OK » button to enter the main MENU. 2. Select RESET DEVICE rotating the button, press the push button to confirm the selection.
  • Page 122 The items are also sold separately. Battery charger (cod.272) 160 Wh battery (cod.271) This charger works with This batteries allowS to power all Lupo Lupo 95 Wh and 160 Wh models with AC/DC functioning. batteries. V – Mount clamp (cod.320)
  • Page 123 Lupo srl - Via V. Sassi 28 Collegno (TO) - 10093 - Italy Phone: +39 011 411 9919 / e-mail: contact@lupo.it / website: www.lupo.it...

This manual is also suitable for:

Ultrapanelpro dual color soft 30Ultrapanelpro full color hard 30Ultrapanelpro full color soft 30Ultrapanelpro dual color hard 60Ultrapanelpro dual color soft 60Ultrapanelpro full color hard 60 ... Show all

Table of Contents