Table of Contents
Advertisement
1.2.10.7
Cleaning work
1.2.10.8
After maintenance work
1.2.11
Repair
1.2.12
Signage
General – Concerning your safety
When checking the tyre pressure stand in the extended path of the
tyre track. Use an at least 6 meter air hose, so that you can keep a
safe distance to the tyre.
Always consider the heavy weight of a wheel during disassembly
and assembly. Use a crane or forklift truck equipped with suitable
claws or a belt-type hoisting device.
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work on
engine and exhaust system.
Never use gasoline or other easily inflammable substances for
cleaning.
When cleaning with a high pressure cleaner, do not subject elec-
trical parts and insulation material to the direct jet of water, or cover
them beforehand.
Do not guide the water jet into the exhaust pipe and into the air
filter.
Reassemble all guards and protective devices.
Close all maintenance flaps and maintenance doors again.
Identify a defective machine with a warning sign.
Only operate the machine after it has been repaired.
Repairs must only be performed by an expert/qualified person.
When replacing safety relevant components, only original spare
parts must be used.
Keep stickers and signage in good and legible condition and
comply with their meaning.
Replace damaged and illegible stickers or signage immediately.
BW 28 RH
31
Advertisement
Table of Contents
