Basic Safety Regulations For Safe Operation - Fayat Group BOMAG BM 500/15 Service Manual

General – Concerning your safety

1.2.3 Basic safety regulations for safe operation

1.2.3.1 Remaining dangers, remaining risks
1.2.3.2 Regular safety inspections
1.2.3.3 Modifications and alterations to the machine
16
Observe your local laws and regulations.
Rights, obligations and rules of conduct for driver or operator:
The driver or operator must:
n
be instructed about his rights and obligations,
n
wear protective equipment as appropriate for the application,
n
have read and understood the operating instructions,
n
have made himself familiar with the operation of the machine,
n
be physically and psychologically able to drive and operate the
machine.
Persons under the influence of alcohol, medication or drugs are not
allowed to operate, service or repair the machine.
Maintenance and repair work requires specific knowledge and
must therefore only be performed by trained specialists.
Despite careful work and compliance with standards and regula-
tions it cannot be ruled out that further dangers may arise when
working with and handling the machine.
Both the machine as well as all other system components comply
with the currently valid safety regulations. Nevertheless, remaining
risks cannot be ruled out completely, even when using the machine
for the purpose it is intended for and following all information given
in the operating instructions.
A remaining risk can also not be excluded beyond the actual
danger zone of the machine. Persons remaining in this area must
pay particular attention to the machine, so that they can react
immediately in case of a possible malfunction, an incident or failure
etc.
All persons remaining in the area of the machine must be informed
about the dangers that arise from the operation of the machine.
Have the machine inspected by an expert / qualified person as
required for the conditions the machine is working under, but at
least once every year.
Unauthorized changes to the machine are prohibited for safety rea-
sons.
Original parts and accessories have been specially designed for
this machine.
BM 500/15