Table of Contents
Advertisement
Print settings
Select this setting item from
• Reduce ink volume
•
Adjust ink volume when ink on the printed surface of printed materials comes off or smudges when
touched immediately after printing.
Note
• Ink volume can be set for each type of paper used.
•
•
• Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Important
•
• Be sure to set this back to OFF after printing since it may result in lower printing speed or lower
print quality.
• Adjust horizontal print position
•
Adjusts the print position when the left/right margins are not aligned.
You can adjust the left/right margins in increments of 0.004 in. (0.1 mm) between -0.12 in. (-3 mm) and
+0.12 in. (+3 mm) centered on the horizontal center of the paper.
Important
•
• When using A4/Letter sized paper, the amount of adjustment that can be made is limited. You
cannot make adjustments greater than this limit.
• Print target for plain paper
•
Select Text only or Text and photos for plain paper printing.
Note
•
• As print results, if you are conscious of unevenness or textures of granularity, select Text and
photos.
• Print charts and diagrams vividly
•
Use this setting when you want to print charts and diagrams in documents vividly on plain paper.
This feature gives preference to printer driver settings.
When you want to give preference to printer settings, select Use Printer Settings in the Print charts
and diagrams in documents more vividly (plain paper) in Print Options dialog box in the printer
driver settings below.
Page Setup Tab Description
Printer settings in
181
(Setup).
Advertisement
Table of Contents
