Table of Contents
Advertisement
Check 4
If you are using Windows and MP Drivers (Printer Driver) are not installed, install it.
Set Up
C-1
The printer's Wi-Fi setting is disabled. (You can also check if the Wi-Fi icon
appear on the printer's screen.)
Enable the Wi-Fi setting in the printer's settings screen.
Wired LAN setting is disabled. (The
the touch screen.)
Enable the Wired LAN setting from the operation panel.
C-2
Wired LAN setting is disabled. Make sure the printer and wireless router are connected via LAN
cable.
If the LAN cable is disconnected, connect it correctly.
If your LAN cable is connected to the WAN port of the wireless router, connect it to the LAN port of the
wireless router.
C-3
No IP address is assigned. (You can also check that the item "3-2-12" in the printed
network settings information is blank.)
Check the following items.
Check 1
wireless router requesting manual addressing?
Refer to the wireless router's manual to enable DHCP (auto-acquisition) settings on the wireless router or to set
a valid IP address on the printer.
Check 2
address may not be set.
Check the network name (SSID) and the password of the wireless router you want to connect to, the IP address
applicable range, and then enter the appropriate IP address on the printer side. If you are unsure, set the
printer's IP address to automatic (DHCP).
C-5
Unable to connect to the specified network. Check the following items.
Are MP Drivers (Printer Driver) installed? (Windows)
icon representing the Wired LAN is not displayed on
Is printer set to obtain an IP address automatically, or is
When you set printer's IP address manually, correct IP
354
does not
Advertisement
Table of Contents
