Table of Contents
Advertisement
Mounting the
Reader
CAUTION
NOTE
To mount the CTLS
device
CAUTION
NOTE
The reader is designed to be flush-mounted to the mounting surface, without
further need for any external mounting devices.
Ensure that your mounting frame has a thickness of 2 mm.
Your mounting surface may have different installation instructions. Refer to your
mounting device's user guide for further instructions.
1
Peel off the plastic liner from the front of the unit.
2
Align the unit's stud holes with the stud holes of your mounting surface.
3
Flush-mount the reader and secure the unit with M5 nuts.
Avoid placing metallic objects at the front of the card reader.
Use M5 mounting studs with a minimum length of 12 mm.
Tighten the nuts using a recommended tightening torque of 7.0 kgfcm.
1
Mounting the Reader
Figure 4
2
UX400 CTLS R
S
Mounting the Reader
3
I
G
EADER
NSTALLATION
UIDE
ETUP
15
Advertisement
Table of Contents
