Error Code - URBANGLIDE RIDE 62R Original Manual

E1
Engine E2
E5
Accelerator E4
H1
Voltage
E8
Overloading E9
Controller
H7
temperature

Error code

Motor failure or improperly
connected cable
Start by accelerating at the
same time
Low voltage
Overvoltage
Overvoltage
Temperature too high
Contact after-sales service.
Turn on your scooter without pressing the accelerator.
Your product's battery is low.
Make sure that the voltage of the charger is 29.4V, to
make sure, use the one provided with the scooter.
Make sure that the voltage of the charger is 29.4V, to
make sure, use the one provided with the scooter.
1. In case of prolonged or heavy use, please turn off
your scooter and wait 30 seconds before resolving the
error.
2. It is recommended to avoid prolonged exposure of
your product to the sun.
3. Avoid overloading your product for long periods of
time.
24