Table of Contents
Advertisement
3-4 APPLICATION
Stop Code
|
|
3
4
You may have to type a letter and send it to several
different people. Each letter must be personalized
and have speeifie but different information inserted
into the body of the text.
These different bits of
information are referred to as "'variables''.
Your KX-R340 will allow you to enter a text and
To Store a Text with Stop Codes
instruct it to stop printing at a particular point so that
you may insert the variable within the body of the
letter.
This code "to stop printing and insert variables'' is
called a Stop Code.
bIN/ OUT
Enter the text name.
4
2 Begin typing
the document.
typing.
4 Continue
y | Perform the steps 1-4 of "To Store Information
in the Text Memory" on p. 37.
Z
Begin typing the document.
When you are at the position within the text
where you want to insert variable information:
Depress the CODE+P. keys.
STOP CODE SET
4
Continue typing.
When your Typing Mode selector is set to the
"LIL" or "JUST", the symbol "' " appears on
the Display at the position where the stop codes
will be inserted.
(See the example below.)
yellow [Q jump 425
® Continue entering the stop codes following the
above procedure for all locations where the
variables will be inserted.
5
When you have completed entering the text,
depress the TEXT key again to store the stop
codes and close your text.
51
AYOW
Advertisement
Table of Contents
