Table of Contents
Advertisement
2
Pc oTEXP OLR
3
Position the
4
carriage on the
error.
8
Type the correct
9
character.
The PRINT
key may
be used to make
manual
corrections.
This feature is especially helpful when correcting in
the Justify Printing Mode or making many correc-
tions successively.
1
Depress the CODE+CANCEL ((X]) keys.
The carriage will automatically return to the left
margin.
©The Display will show the symbol "Q¥]".
2
Depress the REVERSE INDEX (B®) key to
position the carriage at the beginning of the line
on which the correction is to be made.
3
Depress the SPACE
BAR,
TAB,
CODE+H,
CODE+J or RACKSPACE
key to position the
carriage on the error.
4
Depress the PRINT key.
The Display will show:
<4 60
5
Retype the error.
This information has now been entered back into
memory but has not reprinted on the paper.
6
Depress the PRINT key.
7
Depress the CANCEL
((X]|) key to delete the
entered characters.
8
Type the correct character.
® Repeat steps 2-8 for each error to be corrected.
9
Depress the RELOC
key.
This will position the carriage to the right of the
character printed last before correction.
©The symbol " Q¥]' will disappear from the
Display.
In the Justify Printing Mode:
@Perform the steps 1-2.
@Depress the PRINT key.
Retype the entire line with the error, and continue
typing the line until the carriage reaches the right
margin. It is necessary to type beyond the error line
so that the typewriter can perform its justification.
Depress the BACKSPACE or SPACEBAR
to posi-
tion the carriage on the error.
@ Depress the CANCEL ((X]) key to delete the error.
@Type the correct characters.
@Depress the PRINT or RETURN
key.
BS
n
Lene]
"
S
=
>
~
>
aw
of
Advertisement
Table of Contents
