Panasonic KX-R340 Operating Instructions Manual page 52

~
&
\w!
wel
=
x)
~~
=
52
To Print a Text with Stop Codes.
Enter the text name.
3 Enter
variable.
Perform steps 1-4 of "To Modify a Text (File)"
on p. 41 to recall the text.
The Display will indicate that you are at the
beginning of the text.
Depress the PRINT key to print to the point
where the first stop code was set. The Display
will show:
STOP CODE
|B | To
The KX-R340 allows you to store phrases and texts
with the NO PRINT feature. By using this feature
you can store information without printing them on
the paper.
When storing in the phrase memory:
Perform step 1 of "To Store Information in the
Phrase Memory" on p. 33.
© Depress the PRINT key or the CODE+PRINT keys.
The Display will show:
Ori
<60
© Perform steps 2-3 of "To Store Information in the
Phrase Memory" on p. 33.
—}
ein the "LIL" or "JUST" mode, this message will
be displayed for about one second, then the symbol
. Sig appears on the Display at the position where
the stop code was set.
3 Enter your variable which will be inserted in the
first position by typing it or recalling it from the
Phrase Memory. (CODE+ 1-20+RETURN key)
4 Depress the PRINT key to resume printing.
@Continue inserting the variables until you have
completed the text.
When storing in the text memory:
© Perform steps 1-4 of "To Store Information in the
Text Memory" on p. 37.
@ Depress the PRINT key or the CODE+PRINT keys.
The Display will show:
© Perform steps 5—6 of "To Store Information in the
Text Memory" on p. 37.
When you use the PRINT key, the carriage will move
corresponding to the Typing Mode Selector. When
you use the CODE+PRINT keys, the carriage will not
move.
<60
i aa i a ail ip dl iS Sk ca i mA DA APIO
i a N