Table of Contents
Advertisement
TK-2300/TK-2700 Operation Manual
¢ Manual Back Feed Function
:
The Slip Back Feed/Release key (assigned to the register's keyboard using
the Program 4 mode) can be used for manual back feed of the slip paper.
Manual back feed can be performed by inputting the number of lines (up
to two digits, in the range of 1 to 99) and then pressing the Slip Back
Feed/Release key.
To perform
alternate
slip printing
1. Insert a slip into the slip printer.
Each item you register is printed on the slip.
Loop here as required to register more items.
7. Remove the slip from the slip printer.
Nv
Ao
PF
To perform auto
batch printing
Insert a slip into the slip printer.
2. Temporarily finalize the registration using the New Balance key, or
finalize the registration using one of the finalization keys.
3. Printing starts after finalization is complete.
4. Remove the slip from the slip printer.
You can also use the following procedure to perform auto batch printing.
The difference between this procedure and the one above is the timing of
insertion of the slip into the printer.
REMOVE
SUP
54
Advertisement
Table of Contents
