Table of Contents
Advertisement
2
Before Starting
You can register most normal transactions in the REG
1 mode. Use the
REG
1 mode
for all examples
shown
in this manual
unless otherwise
noted. Note also that you must identify a clerk by pressing a clerk button
(not available in the United States or Canada) or inputting a clerk secret
number before operating the cash register.
Note the following points that apply to the examples in this manual
e The prices or rates in parentheses in the tables that come at the
beginning of each example are those programmed to keys.
e¢ Examples are independent of each other. This means
that though one
example may show a unit price of $2.00 for Department 5, another
example may show $10.00 for Department 5.
e Receipt examples shown in this manual are not actual size. Actual
receipts are 45mm wide.
e Department keys, PLUs and function keys can be assigned an
applicable mode, which limits the modes in which these keys can be
operated.
Preset descriptors for items in receipt samples are specific for each
example. This means
that a descriptor for an item on one receipt sample
may differ from the descriptor for the same item on a different receipt
sample.
2-1 Long PLUs and Short PLUs
Short PLUs
Long PLUs
PLUs are available as Long PLUs and Short PLUs. The memory allocation
operation (Programming Manual, Program 5 Mode) makes it possible to
select from among simultaneous use of Long PLUs and Short PLUs, use of
Long PLUs only, or use of Short PLUs only.
The following describes programmability and functions of Short PLUs.
e Short PLUs can be preset with unit price for later automatic recall.
¢ Short PLUs are identified by sequential numbers.
* Short PLUs can be used as open PLUs.
¢ Short PLUs can be assigned 12-character or 16-character descriptors.
¢ Short PLUs are equipped with a sales amount totalizer and counter.
In addition to the points described above for Short PLUs, the following
programmability and functions are also available for Long PLUs.
e Long PLUs can be used as PLUs for set menu registration.
e Long PLUs can be used as PLUs for bottle link/return registration.
e An actual stock totalizer is available, so long PLUs can be used for
control and monitoring of stock by programming a minimum stock value.
e Long PLUs can be preset with Random PLU codes up to 6 digits.
The following two methods are available for registration of Long PLUs.
¢ Registration using the Flat-Long PLU key.
¢ Registration using a PLU number or Random PLU code and the PLU key.
Regardless of the registration method used, the registration result is the
same.
Advertisement
Table of Contents
