Advertisement
Preparing
the
remote
control
Do not:
• mix old and new batteries.
@
Insert so the poles (+ and
) match those in the remote control.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese
batteries.
• use batteries if the covering
has been peeled off.
Mishandling
of batteries can cause electrolyte
leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
R6/LR6, AA
• Do not use rechargeable
type batteries.
•
Use
Aim at the remote control signal sensor (-.) page 11), avoiding
obstacles,
at a maximum range of 7 m (23 feet) directly in front of
the unit.
(_
Performing
QUICK
SETUP
The
QUICK
SETUP
screen
assists
you to make
necessary
settings.
To display the picture from the main unit_ turn on your television
and change its video input mode
(e,g. VIDEO 1, AV 1_etc.).
• To change your television's
video input mode, refer to its operating
instructions.
• This remote control can perform some basic television operations
(4 page 10).
Turn on the unit.
h,, T, <,i_--
ENTER
!i!i
=-RETURN,
--SETUP
Select "DVD/CD".
Press and hold to show
the QUICK SETUP
screen.
Follow the messages
and make the settings.
eMenu
Language
oTV Type
oTV Aspect
Press to finish QUICK
SETUP.
Press to exit.
To change these settings later
Select "QUICK SETUP" in the "Others" menu (_ page 25).
Advertisement
